MSTPD17=0, MSTPD3=0, MSTPD19=0, MSTPD6=0, MSTPD20=0, MSTPD16=0, MSTPD28=0, MSTPD14=0, MSTPD29=0, MSTPD5=0, MSTPD2=0, MSTPD31=0
Module Stop Control Register D
| Reserved | These bits are read as 11. The write value should be 11. |
| MSTPD2 | AGT1 Module StopNote: AGT1 is in the module stop state when the count source is either of PCLKB, PCLKB/2 or PCLKB/8. In case the count source is sub-clock or LOCO, this bit should be set to 1 except when accessing the registers of AGT1. 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD3 | AGT0 Module StopNote: AGT0 is in the module stop state when the count source is either of PCLKB, PCLKB/2 or PCLKB/8. In case the count source is sub-clock or LOCO, this bit should be set to 1 except when accessing the registers of AGT0. 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| Reserved | This bit is read as 1. The write value should be 1. |
| MSTPD5 | GPT ch0 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD6 | GPT ch6 - ch1 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| Reserved | These bits are read as 1111111. The write value should be 1111111. |
| MSTPD14 | POEG Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| Reserved | This bit is read as 1. The write value should be 1. |
| MSTPD16 | 16-Bit A/D Converter Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD17 | 24-bit Sigma-Delta A/DConverter Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| Reserved | This bit is read as 1. The write value should be 1. |
| MSTPD19 | 8-Bit D/A Converter Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD20 | 12-bit D/A Converter Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| Reserved | These bits are read as 1111111. The write value should be 1111111. |
| MSTPD28 | ACMPHS0 Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| MSTPD29 | Comparator-LP Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |
| Reserved | This bit is read as 1. The write value should be 1. |
| MSTPD31 | Operational Amplifier Module Stop 0 (0): Cancel the module-stop state 1 (1): Enter the module-stop state |